EMP Tech Co.,Ltd
EMP Tech Co.,Ltd
Contact Us
NEED HELP FOR YOUR NEXT PROJECT?
Please fill in the form below and our professionals will contact you within 12 hours! For a more prompt reply, you may reach us by phone call or WhatsApp: +86-180-2619-3705.
7 reasons and treatment methods for white spots in die-cast aluminum

7 reasons and treatment methods for white spots in die-cast aluminum

7 reasons and treatment methods for white spots in die-cast aluminum



  • The oxidation and coloring of die-cast aluminum often show white spots. To ensure that the color difference of the product is within the tolerance range and meets customer requirements. The key to solving this problem is to understand the reason.

  • The following will introduce the causes and treatment methods for everyone:

  1. If the washing is not clean, strengthen the washing.


  2. Dirty water can easily contaminate the film during washing. Therefore, the water needs to replace to ensure the washing quality.


  3. The oxide film is polluted by smoke, dust, acid, and alkali mist in the air. Therefore, it is necessary to strengthen washing, timely dyeing, and transfer to solve this problem.


  4. The oxide film is contaminated by oil stains and sweat stains. The product needs to be protected, and the product's surface cannot touch by hand.


  5. Although insoluble impurities exist in the industry, they are contaminated and cannot be dyed. At this time, the dye solution should be filtered or replaced, and Clean the bath regularly.


  6. There is residual acid flowing out of the gaps and deep holes of the product, and clean the product with water.


  7. The dye solution is contaminated, causing pitting corrosion of the dyed workpiece. The dye needs to be replaced, and care should be taken to avoid introducing impurity ions during the operation.

    Aluminum-die-cast-oxidation.gif

Related News
  • Why Is It Harmful If the Aluminum Electric Motor Housing Is Not Grounded?

    Why Is It Harmful If the Aluminum Electric Motor Housing Is Not Grounded?

    Ⅰ. The advantages of aluminum electric motor housingThe aluminum electric motor housing has good ductility and low specific gravity, and also has the advantages of light weight, high strength, good h...
  • The 2020 Die Casting Technology Seminar

    The 2020 Die Casting Technology Seminar

    The 2020 Die Casting Mold Technology Seminar is held as scheduled at Buhler's Wuxi factory from November 24 to 25, 2020. More than 110 trainees came from Zhejiang and Shanghai, Hubei, Guangdong, S...
  • 5 ways to avoid scratches of castings

    5 ways to avoid scratches of castings

    Reasons:① It is caused by the side and corner of the mold, equipment, or worktable when opening the mold.② The castings of each operation process are stacked.③ Improper behavior of each process,...