EMP Tech Co.,Ltd
EMP Tech Co.,Ltd
Contact Us
NEED HELP FOR YOUR NEXT PROJECT??
Please fill in the form below and our professionals will contact you within 12 hours! For a more prompt reply, you may reach us by phone call or WhatsApp: +86-180-3316-3576.
3 differences between electric vehicles and fuel vehicles

3 differences between electric vehicles and fuel vehicles

3 differences between electric vehicles and fuel vehicles



1. Different sources of energy.

As can be seen from the name, electric cars use electricity, while ordinary cars use ordinary gasoline. Due to different energy sources, their use methods are also unequal. Electric vehicles mainly rely on charging, and fuel vehicles mainly rely on petroleum.

2. The waiting state is different.

While the car is waiting, ordinary vehicles still need to consume gasoline. For example, when you encounter a red light or a traffic jam, you are unlikely to turn because the waiting time at this time is uncertain. It may be a few minutes or tens of minutes, which is different for electric vehicles. The electric car is not afraid of stalling, it can stop completely, and it will not take long to start like an ordinary car. In addition, some electric vehicles have battery panels. When waiting for the auto, if there is sun, you can charge while waiting.

3. The emissions are different.

General energy vehicles burn gasoline, so the exhaust contains a lot of exhaust gas, which causes harm to air pollution. The air quality in big cities is low, mainly because cars burn too much oil and exhaust gas exceeds the natural balance. Electric vehicles have no emissions, are perfectly environmentally friendly, and will not adversely affect the environment.

new-engine-car.jpg

Related News
  • 2 Reasons of Using Aluminum Castings in Automotive Industry

    2 Reasons of Using Aluminum Castings in Automotive Industry

    Castings made of aluminum alloys are widely used in various industries. Especially since the light-weight of automobiles, aluminum alloys are favored by the automobile industry due to their advantages...
  • Common Methods for Cleaning and Surface Treatment of Die Castings

    Common Methods for Cleaning and Surface Treatment of Die Castings

    Cleaning of die casting partsMethods of removing spures and flash1) Manual operation: using simple tools such as hammers, files, and pliers to remove the excess parts of die casting parts such as the ...
  • Advantages of Die Casting

    Advantages of Die Casting

    Compared with many other manufacturing process, die casting have advanced advantage, which could fabricate effective cost part and high output.1) Good product quality. Because of the rapid heat conduc...