In the current stage of new energy vehicles, there are more and more structures connecting the motor and the transmission. This type of structure requires higher parallelism of the notch between the front and rear bearing endplates of the motor and the transmission. If the parallelism is not very satisfactory, it will immediately jeopardize the installation precision of the transmission and the motor and improve the noise level of the whole vehicle, and finally affect the comfort of the whole vehicle and reduce the passenger's experience. Therefore, the requirements for the die casting mold of the electric motor housing are getting higher and higher.
The following is a detailed introduction to the production method of the die casting mold for the electric motor housing. These methods allow us to understand the motor and the electric motor housing more conveniently.
1. This product is involved in the production and processing industry of motor hoods and the manufacturing industry of die casting moulds for electric motor housings.
It includes a square mold itself. A forming area is set on the mold itself, and two sides of the forming area are set with concave grooves with a rectangular cross-section; the forming area is set with adjacently arranged first aluminum die-casting areas and second aluminum die casting areas. In the first aluminum die-casting area, a plurality of elongated concave grooves arranged in parallel planes are set, and a plurality of terrace dies with square cross-sections are set in the second aluminum die casting area.
2. The design of the die casting mold for the electric motor housing is based on the effective setting of the structure of the aluminum die casting area on the mold itself, so that the forming of the electric motor housing is relatively accurate, and the forming effect is very good.
3. The forming aluminum die-casting frame with factory nameplate is immediately set in the second aluminum die casting area. When the electric motor housing is formed, the production and processing of the factory nameplate is additionally completed, so the production and processing efficiency is high.
4. According to the empty part set at the bottom end of the die casting mold itself, the installation of the die casting mold of the electric motor housing itself is more convenient and accurate.
The above is aimed at the general professional and technical personnel in this industry, who can understand the basic principles of the design of the die casting mold for the electric motor housing and can carry out various changes, modifications, replacements and modifications to this implementation.