[email protected]
NO.38 Duanzhou 3rd Road, Zhaoqing(526060), Guangdong, China
Please fill in the form below and our professionals will contact you within 12 hours! For a more prompt reply, you may reach us by phone call or WhatsApp: +86 136 9425 7500.
5 Reasons for Blackening of Aluminum Alloy Die Casting Parts

5 Reasons for Blackening of Aluminum Alloy Die Casting Parts

5 Reasons for Blackening of Aluminum Alloy Die Casting Parts

Aluminum metal and aluminum alloys have good fluidity and plasticity, but they tend to turn black during use. Why? The following are the reasons for the blackening of the surface of aluminum alloy die castings:

1. Unreasonable process design

The aluminum alloy die-casting parts are not handled properly after cleaning or pressure inspection, which creates conditions for the aluminum alloy die-casting parts to turn black and accelerate the generation of mildew.

2. Improper storage management

When the aluminum alloy die castings are stored at different heights in the warehouse, the moldy conditions are also different.

3. Internal factors of aluminum alloy

Many aluminum alloy die-casting manufacturers do not do any cleaning treatment after die-casting and machining processes, or simply flush with water, they cannot be thoroughly cleaned, and the surface of die-cast aluminum has corrosiveness such as mold release agent, cutting fluid, saponification fluid, etc. Substances and other stains, these stains accelerate the speed of black mold spots of aluminum alloy die castings.

4. External environmental factors of aluminum alloy

Aluminum is an active metal, which is easily oxidized to become black or moldy under certain temperature and humidity conditions, which is determined by the characteristics of aluminum itself.

5. Selection of cleaning agent is not appropriate

The selected cleaning agent is highly corrosive, causing corrosion and oxidation of die-casting aluminum.


Related News
  • The Future of Die Casting

    The Future of Die Casting

    Due to the discussions about the future of the combustion engine in general and the diesel engine in particular, many die casting foundries have to adjust to profound structural changes on the demand ...
  • EMP Exhibits in The 2019 AAPEX Show

    EMP Exhibits in The 2019 AAPEX Show

    The AAPEX Show takes place from November 5th to November 8th, 2019 at the Las Vegas Convention Center located at 3150 Paradise Road, Las Vegas, NV 89109. As an IATF certified aluminum die casting part...
  • 6 Tips For Controlling Product Quality

    6 Tips For Controlling Product Quality

    High-quality products are manufactured, managed, and controlled, not tested. Quality control is a systematic project, with its own rules and unique control methods; if you do not master the correct ...