In the production of aluminum alloy die-cast parts, burrs are the most common problem during the metal-cutting process. To ensure the smoothness of the workpiece, workers often add a deburring process after processing.
In the workpiece processing industry, the application of deburring machines is very common. It has high operating efficiency and a good polishing effect on the workpiece. However, scratches on the workpiece may also occur during the operation, so we have summarized three technical experiences.
First, during rough machining, according to needs and experience, without affecting the surface quality of the workpiece, rationally select the particle size of the abrasive to make it have higher grinding efficiency, and at the same time appropriately increase the grinding time for finishing, and Further improve the surface quality of the workpiece. Second, before grinding, filter the coolant to remove hard particles so that it has high purity. Try to choose a relatively clean processing environment during the grinding process. Third, in the sandpaper production process, uneven size and uneven distribution of abrasive grains will inevitably occur. To improve the processing accuracy as much as possible, you can use good quality sandpaper during the processing process and trim the sandpaper to remove the abrasive grains on the surface. At the same time, without affecting the processing efficiency, try to choose a uniform and uniform distribution of the abrasive grains. , sandpaper with small particle size.
EMP Die Casting Co., Ltd., has advanced deburring equipment in terms of deburring processing. Together with manual processing inspection by staff, the die castings are clean and burr-free, ensuring that the appearance quality of the die castings is qualified, and providing high quality to every customer. quality.
NO.38 Duanzhou 3rd Road, Zhaoqing(526060), Guangdong, China
